| About |
|---|
| Product Description | |
|---|---|
| Supplier | Covestro |
| Material Status | Commercial: Active |
| Features | Mechanical property,Hydrolysis stability,Flame Characteristics |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Shore hardness | 80 | ISO 868 | |
| tensile strength | 32 | MPa | DIN 53504 |
| Tensile strain | |||
| fracture | 500 | % | DIN 53504 |
| tensile strength | |||
| 100% strain | 4.5 | MPa | DIN 53504 |
| 300% strain | 10.0 | MPa | DIN 53504 |
| Wear resistance | 40 | mm² | ISO 4649, method B |
| tear strength | 85 | kN/m | ISO 34-1 |
| Compression permanent deformation | |||
| 24 h; 70 °C | 40.3 | % | ISO 815 |
| 72 h; 23 °C | 17.1 | % | ISO 815 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 1124 | kg/m³ | ISO 1183 |
| Process Conditions | |||
|---|---|---|---|
| Injection molding | Nominal value | Unit | Test method |
| Melt Temperature | 160-180 | ℃ | |
| Mold temperature | 20-40 | ℃ | |
| Extrusion melt temperature | 165-185 | ℃ | |
| Minimum drying temperature | 100 | ℃ | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |