| About |
|---|
| Product Description | |
|---|---|
| Supplier | Covestro |
| Material Status | Commercial: Negative |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.16 | g/cm³ | DIN 53479 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | 91 | Shore A | ISO 868 |
| Tensile stress | |||
| 100% strain, 200 mm/min | 8.0 | MPa | DIN 53504 |
| 300% strain, 200 mm/min | 17.0 | MPa | DIN 53504 |
| Tensile strain | |||
| Fracture, 200 mm/min | 480 | % | DIN 53504 |
| tensile strength | |||
| Limit, 200 mm/min | 50.0 | MPa | DIN 53504 |
| Wear resistance | 40 | mm³ | ISO 4649 |
| tear strength | |||
| 500 mm/min | 120 | kN/m | ISO 34-1 |
| Process Conditions | |||
|---|---|---|---|
| Injection | Nominal value | Unit | Test method |
| extrusion | Nominal value | Unit | Test method |
| Melt Temperature | 190 – 210 | ℃ | |
| Mold temperature | 20 – 40 | ℃ | |
| Melt Temperature | 175 – 195 | ℃ | |
| Maximum drying temperature | 100 | ℃ | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |