Utechllan US-65AU10

About

Product Description
Supplier	Covestro
Material Status	Commercial: Negative

Technical Data
MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	71		ISO 868
tensile strength
100% strain, 200 mm/min	2.8	MPa	DIN 53504
300% strain, 200 mm/min	5.2	MPa	DIN 53504
Limit, 200 mm/min	24.0	MPa	DIN 53504
Tensile strain
fracture	900	%	DIN 53504
tear strength
500 mm/min	180	kN/m	ISO 34
Compression deformation
70℃，24hr	51.7	%	ISO 815
23℃，72hr	23.4	%	ISO 815
abrasion resistance	180	mm³	ISO 4649

PHYSICAL	Nominal value	Unit	Test method
Density	1.150	g/cm³	ISO 1183

Process Conditions
Injection	Nominal value	Unit	Test method
Melting temperature	155 – 175	℃
Mold temperature	20 – 40	℃
drying temperature	80	℃

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.