| About |
|---|
| VALOX 4031 is a 30% high strength glass fibre reinforced PBT injection moulding resin with excellent strength, stiffness and heat resistance. Applications: appliance handles, spotlights, electric motors.&& |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | polybutylene terephthalate |
| Material Status | Commercial: Active |
| Features | Good Rigidity,High Heat Resistance,HB |
| Availabilitys | North America,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| IMPACT | Nominal value | Unit | Test method |
| Charpy Notched Impact Strength | |||
| -30℃ | 6.0 | kJ/m² | ISO 179/1eA |
| -30℃ | 12 | kJ/m² | ISO 179/2C |
| 23℃ | 7.0 | kJ/m² | ISO 179/1eA |
| 23℃ | 12 | kJ/m² | ISO 179/2C |
| Charpy Unnotch Impact strength | |||
| -30℃ | 55 | kJ/m² | ISO 179/1eU |
| -30℃ | 60 | kJ/m² | ISO 179/2U |
| 23℃ | 50 | kJ/m² | ISO 179/1eU |
| 23℃ | 65 | kJ/m² | ISO 179/2U |
| Impact strength of cantilever beam notch | ASTM D256 | ||
| -30℃ | 100 | J/m | ASTM D256 |
| 0℃ | 100 | J/m | ASTM D256 |
| 23℃ | 100 | J/m | ASTM D256 |
| Impact strength of cantilever beam notch | ISO 180/1A | ||
| -30℃ | 10 | kJ/m² | ISO 180-1A |
| 0℃ | 11 | kJ/m² | ISO 180-1A |
| 23℃ | 11 | kJ/m² | ISO 180-1A |
| Impact strength of cantilever beam notch | ASTM D4812 | ||
| -30℃ | 880 | J/m | ASTM D4812 |
| 23℃ | 880 | J/m | ASTM D4812 |
| Notched impact strength of cantilever beam | ISO 180/1U | ||
| -30℃ | 55 | kJ/m² | ISO 180/1U |
| 23℃ | 55 | kJ/m² | ISO 180/1U |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed, 3.2 mm | 205 | ℃ | ASTM D648 |
| 0.45 MPa, unannealed, 3.2 mm | 220 | ℃ | ASTM D648 |
| 0.45 MPa, unannealed, 100 mm span | 220 | ℃ | ISO 75-2/Be |
| 0.45 MPa, unannealed, 64 mm span | 220 | ℃ | ISO 75-2/Bf |
| Vicat Softening Temp | |||
| A50 | 220 | ℃ | ISO 306/A50 |
| B50 | 215 | ℃ | ISO 306 |
| B120 | 215 | ℃ | ISO 306/B120 |
| Ball pressure test | |||
| 125℃ | Pass | IEC 60695-10-2 | |
| Linear coefficient of thermal expansion | |||
| TD | ISO 11359-2 | ||
| MD | ISO 11359-2 | ||
| -40 to 40 ℃ | 2.1E-5 | cm/cm/℃ | ISO 11359-2 |
| 23 to 80 ℃ | 3.0E-5 | cm/cm/℃ | ISO 11359-2 |
| 23 to 150 ℃ | 2.0E-5 | cm/cm/℃ | ISO 11359-2 |
| -40 to 40 ℃ | 7.4E-5 | cm/cm/℃ | ISO 11359-2 |
| 23 to 80 ℃ | 1.2E-4 | cm/cm/℃ | ISO 11359-2 |
| 23 to 150 ℃ | 1.7E-4 | cm/cm/℃ | ISO 11359-2 |
| Relative temperature index | |||
| Electrical performance | 140 | ℃ | UL 746 |
| Strength mechanical performance | 140 | ℃ | UL 746 |
| Impact mechanical performance | 140 | ℃ | UL 746 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | > 1.0E+15 | ohms | IEC 60093 |
| Volume resistivity | > 1.0E+15 | ohms·cm | ASTM D257 |
| Volume resistivity | > 1.0E+15 | ohms·cm | IEC 60093 |
| Dielectric strength | ASTM D149 | ||
| 0.8 mm in oil | 26 | kV/mm | ASTM D149 |
| 1.6 mm in oil | 24 | kV/mm | ASTM D149 |
| 3.2 mm in oil | 18 | kV/mm | ASTM D149 |
| Dielectric strength | IEC 60243-1 | ||
| 0.8 mm in oil | 26 | kV/mm | IEC 60243-1 |
| 1.6 mm in oil | 24 | kV/mm | IEC 60243-1 |
| 3.2 mm in oil | 15 | kV/mm | IEC 60243-1 |
| Relative permittivity | IEC 60250 | ||
| 50 Hz | 3.30 | IEC 60250 | |
| 60 Hz | 3.30 | IEC 60250 | |
| 1 MHz | 3.10 | IEC 60250 | |
| Dissipation factor | IEC 60250 | ||
| 50 Hz | 1.6E-3 | IEC 60250 | |
| 60 Hz | 1.6E-3 | IEC 60250 | |
| 1 MHz | 0.014 | IEC 60250 | |
| Arc resistance | PLC 5 | ASTM D495 | |
| Compared to the leakage tracing index | PLC 0 | UL 746 | |
| Compared to the leakage tracing index | 250 | V | IEC 60112 |
| High Arc Burning Index (HAI) | PLC 1 | UL 746 | |
| High voltage arc marking rate | |||
| HVTR | PLC 1 | UL 746 | |
| Hot wire ignition | |||
| HWI | PLC 1 | UL 746 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | UL 94 | ||
| 0.80 mm | HB | UL 94 | |
| 6.00 mm | HB | UL 94 | |
| Glowing wire flammability index | |||
| 1.0 mm | 750 | ℃ | IEC 60695-2-12 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Filler | 30 | % | ASTM D229 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 10000 | MPa | ASTM D638 |
| Tensile modulus | 10000 | MPa | ISO 527-1-2 |
| tensile strength | |||
| fracture | 140 | MPa | ASTM D638 |
| fracture | 135 | MPa | ISO 527-2/5 |
| yield | 135 | MPa | ISO 527-2/5 |
| yield | 140 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 3.0 | % | ASTM D638 |
| fracture | 2.0 | % | ISO 527-2/5 |
| yield | 3.0 | % | ASTM D638 |
| yield | 2.0 | % | ISO 527-2/5 |
| Bending modulus | 8300 | MPa | ISO 178 |
| 50 mm span | 7900 | MPa | ASTM D790 |
| bending strength | ISO 178 | ||
| Fracture, 50 mm span | 190 | MPa | ASTM D790 |
| Yield, 50 mm span | 190 | MPa | ASTM D790 |
| — | 200 | MPa | ISO 178 |
| — | 210 | MPa | ISO 178 |
| Fracture bending strain | 3.0 | % | ISO 178 |
| Rockwell hardness | |||
| R-level | 125 | ISO 2039-2 | |
| Ball hardness | |||
| H358/30 | 125 | MPa | ISO 2039-1 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 1.54 | g/cm³ | ASTM D792 |
| Density | 1.54 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 266℃，5.0kg | 50 | g/10min | ASTM D1238 |
| Melt Volume Rate | ISO 1133 | ||
| 250℃，2.16 kg | 12.0 | cm³/10min | ISO 1133 |
| 250℃，5 kg | 30.0 | cm³/10min | ISO 1133 |
| 265℃，5 kg | 40.0 | cm³/10min | ISO 1133 |
| Shrinkage rate | |||
| TD | 0.50 to 1.0 | % | Internal Method |
| MD | 0.30 to 0.70 | % | Internal Method |
| Water absorption rate | |||
| Saturation, 23 ℃ | 0.26 | % | ISO 62 |
| Equilibrium, 23 ℃, 50% RH | 0.060 | % | ISO 62 |
| Apparent viscosity of melt | |||
| 260℃，1500 sec^-1 | 150 | Pa·s | ISO 11443 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 110 to 120 | °C | |
| Drying time | 2.0 to 4.0 | hr | |
| Recommended maximum moisture content | 0.020 | % | |
| Hopper temperature | 40 to 60 | °C | |
| Barrel rear temperature | 230 to 245 | °C | |
| Barrel middle temperature | 240 to 255 | °C | |
| Barrel front temperature | 245 to 265 | °C | |
| Nozzle temperature | 240 to 260 | °C | |
| Processing (melt) temperature | 250 to 270 | °C | |
| Mold temperature | 40 to 100 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Tensile Bar |
| 3. 0.20 in/min |
| 4. Type I, 0.20 in/min |
| 5. 0.051 in/min |
| 6. 0.079 in/min |
| 7. Yield |
| 8. Break |
| 9. 2 mm/min |
| 10. 80*10*4 sp=62mm |
| 11. 80*10*4 |
| 12. 120*10*4 mm |
| 13. 80*10*4 mm |
| 14. Rate A (50°C/h), Loading 2 (50 N) |
| 15. Rate B (120°C/h), Loading 2 (50 N) |
| 16. Tungsten Electrode |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |