Valtec CG881 - SOLIAO

About
Valtec CG881 is a medium impact copolymer with a very high melt flow; it is specially designed for compounders. It has a good low-temperature impact resistance with a good stiffness as well. The base resin in this product meets the requirements of the FDA contained in the Code of Federal Regulations in 21 CFR 177.1520. Features: Excellent processability Good stability Good stiffness/impact balance Typical Applications: Compounding&&

About

Valtec CG881 is a medium impact copolymer with a very high melt flow; it is specially designed for compounders. It has a good low-temperature impact resistance with a good stiffness as well. The base resin in this product meets the requirements of the FDA contained in the Code of Federal Regulations in 21 CFR 177.1520. Features: Excellent processability Good stability Good stiffness/impact balance Typical Applications: Compounding&&

Product Description
Generic	PP homopolymerization
Material Status	Commercial: Negative
Features	Good Rigidity,Excellent Processability,High liquidity,Good stability,low-temperature impact resistance,Impact copolymer
Availabilitys	North America,Latin America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D792
Melt Flow Rate
230℃，2.16kg	35	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	25.6	MPa	ASTM D638
Tensile strain
yield	6.0	%	ASTM D638
Bending modulus	1200	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	59	J/m	ASTM D256-A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	104	℃	ASTM D648

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.