VAMPALLOY 0024 V0 11

About
UL 94 V0, very good fluidity, very good surface appearance, medium chemical resistance, chlorine and bhromine free.&&

Product Description
GenericPC+ABS
Material StatusCommercial: Active
FeaturesGood surface appearance,Good liquidity,Halogen free,Solvent resistance,V-0
AvailabilitysAfrica & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICALNominal valueUnitTest method
Density1.18g/cm³ASTM D792
Shrinkage rate ASTM D955
MD0.60%ASTM D955
TD0.60%ASTM D955
Water absorption rate
saturated0.15%ASTM D570

MECHANICALNominal valueUnitTest method
Tensile modulus2500MPaASTM D638
tensile strength
yield50.0MPaASTM D638
Tensile strain
fracture> 50%ASTM D638
Bending modulus2700MPaASTM D790
bending strength95.0MPaASTM D790

IMPACTNominal valueUnitTest method
Impact strength of cantilever beam notch25kJ/m²ISO 180/A
Notched impact strength of cantilever beam无断裂 ISO 180

THERMALNominal valueUnitTest method
Hot deformation temperature
1.8 MPa, unannealed80.0ASTM D648-A
Vicat Softening Temp110ASTM D1525 3
Relative temperature index75.0UL 746
Electrical performance75.0UL 746
Impact mechanical performance75.0UL 746

Electrical performanceNominal valueUnitTest method
Compared to the leakage tracing index250VIEC 60112

FLAME CHARACTERISTICSNominal valueUnitTest method
Flame retardant level UL 94
1.60 mmV-0 UL 94
3.20 mmV-0 UL 94
Glowing wire flammability index
2.0 mm850IEC 60695-2-12
Igniting temperature of the hot wire
2 mm775IEC 60695-2-13

Process Conditions
injectionNominal valueUnitTest method
Drying temperature70°C
Drying time3.0hr
Processing (melt) temperature260°C
Mold temperature70°C

Notes
1. Typical properties: these are not to be construed as specifications.
2. Loading 2 (50 N)
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.