Vatpol 200 - SOLIAO

About
Vatpol 200 is a Polyethylene material filled with 60% calcium carbonate. It is available in Africa & Middle East, Asia Pacific, or Europe for blow molding, film extrusion, injection molding, or thermoforming. Typical applications include: Additive/Masterbatch Bags/Liners Bottles Film&&

Product Description
Generic	PE
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.48 to 1.52	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	0.65 to 0.85	g/10min	ASTM D1238
Ash Content
600℃	59 to 61	%	ISO 3451-1
humidity	< 3.0	%

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.