| About |
|---|
| Blend of linear SIS triblock and SI diblock copolymer. Contains ~18% SI diblock copolymer. Low styrene, low modulus. VECTOR 4113A and VECTOR 4113N styrenic block copolymers are blended products composed of a linear SIS triblock copolymer and an SI diblock copolymer. They are softer than VECTOR 4111A SIS/SI due to lower styrene content and presence of diblock copolymer, making them well-suited for use in hot melt pressure sensitive adhesives, elastomer compounds and photopolymer plate applications. VECTOR 4113A SIS/SI is offered as a dense pellet supplied from the United States. VECTOR 4113N SIS/SI is offered as a porous pellet supplied from China.&& |
| Product Description | |
|---|---|
| Generic | SIS+SI |
| Material Status | Commercial: Active |
| Features | Soft |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.918 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 200℃，5.0kg | 1.0 | g/10min | ASTM D1238 |
| Solution viscosity | 1200 | mPa·s | ASTM D2196 |
| styrene content | 15.0 | wt% | Internal Method |
| Ash Content | 0.3 | % | ASTM D1416 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 1 second | 31 | ASTM D2240 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| Yield, 25 ℃ | 24.8 | MPa | ASTM D412 |
| 300% strain, 25 ℃ | 1.10 | MPa | ASTM D412 |
| Tensile strain | |||
| Fracture, 25 ℃ | 1300 | % | ASTM D412 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Diblock Content | 18.0 | wt% | Internal Method |
| volatility | 0.2 | wt% | Internal Method |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Compression Molded |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |