| About |
|---|
| Blend of SIS triblock and SI diblock copolymer Medium styrene copolymer Outstanding thermal stability Outstanding melt processability Complies with U.S. FDA 21 CFR 177.1810; Consult the regulations for complete details VECTOR 4213 is a blend of SIS triblock and SI diblock copolymer with a medium styrene content targeted at 25%. It provides enhanced cohesive strength and heat resistance. These properties provide a compounder wide formulating options in formulating hot melt adhesive with higher strength and lower viscosity which are very desirable attributes for disposable adhesive applications.&& |
| Product Description | |
|---|---|
| Generic | SIS+SI |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Excellent Processability,Low Viscosity,Block Copolymer,Heat Stabilized |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.940 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 200℃，5.0kg | 12 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 1 second | 51 | ASTM D2240 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 13.1 | MPa | ASTM D412 |
| 300% strain | 2.76 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 1200 | % | ASTM D412 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |