VECTOR® 4461 - SOLIAO

About
VECTOR 4461 Styrene-Butadiene-Styrene (SBS) Block Copolymer SBS(1) triblock copolymer. Contains <1% diblock copolymer. High styrene, high melt flow block copolymer. Supplied as a porous pellet, dusted with talc. VECTOR styrenic block copolymers find use under certain regulations as articles or as ingredients in articles intended for food contact or medical applications. Please contact your Dexco Polymers agent for a detailed letter of certification or further information. VECTOR 4461 linear, pure SBS block copolymer is produced via proprietary sequential anionic polymerization technology from Dexco Polymers LP, a Dow/ExxonMobil Venture. It is formulated with the antioxidant TNPP (tris(nonylphenyl) phosphite). It has the lowest elasticity of the SBS family of products while providing high modulus, low creep resistance, excellent cohesive strength, and good melt processability. It is particularly suited for hot melt adhesives requiring high strength and low viscosity.&&

About

VECTOR 4461 Styrene-Butadiene-Styrene (SBS) Block Copolymer SBS(1) triblock copolymer. Contains <1% diblock copolymer. High styrene, high melt flow block copolymer. Supplied as a porous pellet, dusted with talc. VECTOR styrenic block copolymers find use under certain regulations as articles or as ingredients in articles intended for food contact or medical applications. Please contact your Dexco Polymers agent for a detailed letter of certification or further information. VECTOR 4461 linear, pure SBS block copolymer is produced via proprietary sequential anionic polymerization technology from Dexco Polymers LP, a Dow/ExxonMobil Venture. It is formulated with the antioxidant TNPP (tris(nonylphenyl) phosphite). It has the lowest elasticity of the SBS family of products while providing high modulus, low creep resistance, excellent cohesive strength, and good melt processability. It is particularly suited for hot melt adhesives requiring high strength and low viscosity.&&

Product Description
Generic	SBS
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,Good flexibility,High liquidity,Low Viscosity,Porous,Food contact compliance
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.958	g/cm³	ASTM D792
Melt Flow Rate
200℃，5.0kg	2.3	g/10min	ASTM D1238
Solution viscosity	850	mPa·s	ASTM D2196
styrene content	43.0	wt%	Internal Method
Ash Content	0.5	%	ASTM D1415

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shore A, 1 second	87		ASTM D2240

elastic body	Nominal value	Unit	Test method
tensile strength
Yield, 25 ℃	31.0	MPa	ASTM D412
300% strain, 25 ℃	8.27	MPa	ASTM D412
Tensile strain
Fracture, 25 ℃	700	%	ASTM D412

Supplementary information	Nominal value	Unit	Test method
Diblock Content		wt%	Internal Method
volatility	0.4	wt%	Internal Method

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.