| About |
|---|
| Has the same excellent balance of properties as A130 with higher temperature capability and easier flow. Slightly more dimensional stability in vapor phase soldering than A130. Suitable for some infrared SMT applications. 30% glass reinforced. Chemical abbreviation according to ISO 1043-1 : LCP Inherently flame retardant FDA compliant UL-Listing V-0 in natural and black at 0.38mm thickness per UL 94 flame testing, and UL-5VA in natural at 1.5mm. Relative-Temperature-Index (RTI) according to UL 746B: electrical 240°C, mechanical 220°C at 0.75mm. UL = Underwriters Laboratories (USA)&& |
| Product Description | |
|---|---|
| Supplier | Celanese |
| Generic | 液态聚合物 |
| Material Status | Commercial: Active |
| Features | Good Dimensional Stability,Good liquidity,Halogen free,Flame Characteristics,V-0 |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.62 | g/cm³ | ISO 1183 |
| Density | 1.62 | g/cm³ | ISO 1183-2 |
| Shrinkage rate | ISO 294-4 | ||
| TD | 0.40 | % | ISO 2577-2 |
| MD | 0.20 | % | ISO 2577-2 |
| TD | 0.40 | % | ISO 294-4 |
| MD | 0.20 | % | ISO 294-4 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 25 | kJ/m² | ISO 179/1eA |
| 23℃ | 25.0 | kJ/m² | ISO 179/1eA 2 |
| Charpy Unnotch Impact strength | |||
| 23℃ | 28 | kJ/m² | ISO 179/1eU |
| Charpy impact strength | |||
| 23℃ | 28.0 | kJ/m² | ISO 179/1eU 2 |
| Impact strength of cantilever beam notch | |||
| 23℃ | 20 | kJ/m² | ISO 180-1A |
| Notched impact strength of cantilever beam | |||
| 23℃ | 26 | kJ/m² | ISO 180/1U |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 8.0 MPa, unannealed | 211 | ℃ | ISO 75-2/C |
| 8.0 MPa | 211 | ℃ | ISO 75-2 2 |
| 1.8 MPa, unannealed | 255 | ℃ | ISO 75-2/A |
| 1.8 MPa | 255 | ℃ | ISO 75-2 2 |
| 0.45 MPa, unannealed | 250 | ℃ | ISO 75-2/B |
| 0.45 MPa | 250 | ℃ | ISO 75-2 2 |
| Vicat Softening Temp | |||
| B50 | 192 | ℃ | ISO 306 |
| B50 | 192 | ℃ | ISO 306 2 |
| Melting temperature | 325 | ℃ | ISO 11357-3 |
| Melting temperature | 325 | ℃ | ISO 11357-3 2 |
| Linear coefficient of thermal expansion | |||
| TD | 1.8E-5 | 1/℃ | ISO 11359-2 |
| TD | 1.8E-5 | 1/℃ | ISO 11359-2 2 |
| MD | 6.0E-6 | 1/℃ | ISO 11359-2 2 |
| MD | 6.0E-6 | 1/℃ | ISO 11359-2 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | > 1.0E+15 | ohms | IEC 60093 |
| Surface resistivity | > 1.0E+15 | ohms | IEC 60093 2 |
| Volume resistivity | 1.0E+15 | ohms·cm | IEC 60093 |
| Volume resistivity | 1.0E+15 | ohms·cm | IEC 60093 2 |
| Dielectric strength | 35 | kV/mm | IEC 60243-1 |
| Dielectric strength | 35 | kV/mm | IEC 60243-1 2 |
| Relative permittivity | IEC 60250 | ||
| 100 Hz | 4.20 | IEC 60250 2 | |
| 1 MHz | 3.70 | IEC 60250 2 | |
| 100 Hz | 4.20 | IEC 60250 | |
| 1 MHz | 3.70 | IEC 60250 | |
| Dissipation factor | IEC 60250 | ||
| 100 Hz | 0.014 | IEC 60250 2 | |
| 1 MHz | 0.018 | IEC 60250 2 | |
| 100 Hz | 0.014 | IEC 60250 | |
| 1 MHz | 0.018 | IEC 60250 | |
| Arc resistance | 182 | sec | Internal Method |
| Compared to the leakage tracing index | 200 | V | IEC 60112 |
| Compared to the leakage tracing index | |||
| CTI | 200 | IEC 60112 2 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | V-0 | UL 94 | |
| Extreme oxygen index | 45 | % | ISO 4589-2 |
| Oxygen index | 45 | % | ISO 4589-2 2 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 15000 | MPa | ISO 527-2/1A/1 |
| tensile strength | |||
| fracture | 160 | MPa | ISO 527-2/1A/5 |
| Tensile strain | |||
| fracture | 1.9 | % | ISO 527-2/1A/5 |
| Tensile Creep Modulus（1 hr） | 13600 | MPa | ISO 899-1 |
| Tensile Creep Modulus（1 hr） | 13600 | MPa | ISO 899-1 2 |
| Tensile creep modulus | |||
| 1000 hr | 11700 | MPa | ISO 899-1 2 |
| 1000 hr | 11700 | MPa | ISO 899-1 |
| Bending modulus | |||
| 23℃ | 14000 | MPa | ISO 178 |
| bending strength | |||
| 23℃ | 245 | MPa | ISO 178 |
| Compression modulus | 22000 | MPa | ISO 604 |
| compressive strength | |||
| 1% strain | 139 | MPa | ISO 604 |
| Rockwell hardness | |||
| M-level | 80 | ISO 2039-2 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 150 | °C | |
| Drying time | 4.0 to 6.0 | hr | |
| Recommended maximum moisture content | 0.010 | % | |
| Hopper temperature | 20 to 30 | °C | |
| Barrel rear temperature | 290 to 300 | °C | |
| Barrel middle temperature | 300 to 310 | °C | |
| Barrel front temperature | 310 to 320 | °C | |
| Nozzle temperature | 310 to 330 | °C | |
| Processing (melt) temperature | 320 to 340 | °C | |
| Mold temperature | 80 to 120 | °C | |
| Injection pressure | 50.0 to 150 | MPa | |
| Injection speed | Fast | ||
| Hold pressure | 50.0 to 150 | MPa | |
| Back pressure | 0.00 to 3.00 | MPa | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 10°C/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |