VEGEMAT® E45114

About
VEGEMAT® is a composite material concept obtained by transforming all the aerial parts of corn with neither separation nor purification of their constituent parts. Thanks to its technical and chemical properties, this new bioplastique material based on corn, 100% biodegradable, is intended to substitute itself from usual plastics of petrochimical origins, design for injection. Pieces mades from VEGEMAT® have the advantages of both wood and cardboard for their natural aspect, their biodegradability and the advantage of plastics for their ease of use. The thermoplastic VEGEMAT® ® granules are shaped by injection moulding with or without having to make any particular adjustment to tooling. VEGEMAT® existe is available in various grades that meet the technical requirements of industrialist. * VEGEMAT® E4589 for making solid items (of > 4-5 mm thick). * VEGEMAT® E45114 for slightly technical items (of between 2 and 4 mm thick). * VEGEMAT® E45122 for making technical items (of < 2mm thick) requiring a really fluid material.&&

About

VEGEMAT® is a composite material concept obtained by transforming all the aerial parts of corn with neither separation nor purification of their constituent parts. Thanks to its technical and chemical properties, this new bioplastique material based on corn, 100% biodegradable, is intended to substitute itself from usual plastics of petrochimical origins, design for injection. Pieces mades from VEGEMAT® have the advantages of both wood and cardboard for their natural aspect, their biodegradability and the advantage of plastics for their ease of use. The thermoplastic VEGEMAT® ® granules are shaped by injection moulding with or without having to make any particular adjustment to tooling. VEGEMAT® existe is available in various grades that meet the technical requirements of industrialist. * VEGEMAT® E4589 for making solid items (of > 4-5 mm thick). * VEGEMAT® E45114 for slightly technical items (of between 2 and 4 mm thick). * VEGEMAT® E45122 for making technical items (of < 2mm thick) requiring a really fluid material.&&

Product Description
Generic	生物可降解聚合物
Material Status	Commercial: Negative
Features	Renewable resources,Biodegradable
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.45	g/cm³	ISO 1183

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	2800	MPa	ISO 527-2
tensile strength
fracture	20.0	MPa	ISO 527-2
Tensile strain
fracture	0.71	%	ISO 527-2
Bending modulus	1800	MPa	ISO 178
bending strength	27.0	MPa	ISO 178

THERMAL	Nominal value	Unit	Test method
Melting temperature	125 to 145	℃

Supplementary information	Nominal value	Unit	Test method
Maximum Hygrometry	80	%
Utilization Temperature	50 to 60	℃

Process Conditions
injection	Nominal value	Unit	Test method
Barrel rear temperature	40 to 50	°C
Barrel middle temperature	60 to 80	°C
Barrel front temperature	100 to 130	°C
Nozzle temperature	110 to 150	°C
Mold temperature	20 to 60	°C

Notes
1. Typical properties: these are not to be construed as specifications.
2. without treating surface
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.