| About |
|---|
| Veradel® 3100 polyethersulfone (PESU) is a very low melt flow, transparent grade that offers high heat deflection temperatures, excellent toughness and dimensional stability, and resistance to steam, boiling water and mineral acids. Other desirable properties include thermal stability, creep resistance and inherent flame resistance. Other grades are available: Veradel® 3200, a low melt flow grade; Veradel® 3300, a medium melt flow grade suggested for general purpose injection molding; Veradel® 3400, a high melt flow grade designed for easy molding of parts with thin walls or long flow lengths; and Veradel® 3600, a very high melt flow grade suggested for compounding, especially of glass or carbon fiber reinforced compounds. This grade was formerly marketed as Gafone™ PESU&& |
| Product Description | |
|---|---|
| Supplier | Solvay |
| Generic | PES |
| Material Status | Commercial: Negative |
| Features | Good flexibility,Good Dimensional Stability,Hydrolysis stability,Flame Characteristics,Food contact compliance,Acidproof,High Heat Resistance,Good bond,Good Tensile Strength,Moderate liquidity,Solvent resistance,Heat Stabilized,V-0 |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.37 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 380℃，2.16kg | 10 to 13 | g/10min | ASTM D1238 |
| Shrinkage rate | |||
| MD | 0.60 | % | ASTM D955 |
| Water absorption rate | |||
| 24hr | 0.56 | % | ASTM D570 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 2600 | MPa | ASTM D638 |
| tensile strength | 91.0 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | > 50 | % | ASTM D638 |
| Bending modulus | 2700 | MPa | ASTM D790 |
| bending strength | 124 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 70 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, annealed | 200 | ℃ | ASTM D648 |
| Melting temperature | 225 | ℃ | |
| Linear coefficient of thermal expansion | |||
| MD | 5.7E-5 | 1/℃ | ASTM D696 |
| Maximum operating temperature | 180 | ℃ | UL 746B |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | 1.0E+14 | ohms | ASTM D257 |
| Volume resistivity | 1.0E+16 | ohms·cm | ASTM D257 |
| Dielectric strength | 16 | kV/mm | ASTM D149 |
| Dielectric constant | |||
| 60 Hz | 3.20 | ASTM D150 | |
| Dissipation factor | |||
| 60 Hz | 4.0E-3 | ASTM D150 | |
| Arc resistance | 50.0 | sec | ASTM D495 |
| Compared to the leakage tracing index | 150 | V | ASTM D3638 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| 0.80 mm | V-0 | UL 94 | |
| Extreme oxygen index | 40 | % | ASTM D2863 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Extrusion | Nominal value | Unit | Test method |
| Drying temperature | 177 | °C | |
| Drying time | 2.5 | hr | |
| Processing (melt) temperature | 343 to 385 | °C | |
| Mold temperature | 149 to 163 | °C | |
| Drying temperature | 177 | °C | |
| Drying time | 2.5 | hr | |
| Barrel 1 zone temperature | 335 to 391 | °C | |
| Barrel 2 zone temperature | 335 to 391 | °C | |
| Barrel 3 zone temperature | 335 to 391 | °C | |
| Barrel 4 zone temperature | 335 to 391 | °C | |
| Barrel 5 zone temperature | 335 to 391 | °C | |
| Connector temperature | 327 to 371 | °C | |
| Melt temperature | 343 to 391 | °C | |
| Nozzle temperature | 327 to 371 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. These flammability ratings are not intended to reflect hazards presented by these or any other materials under actual fire conditions. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |