| About |
|---|
| Veradel 3400是一种高熔体流动速率的透明聚醚砜（PESU ），具有高热变形温度，优良的韧性和尺寸稳定性，耐水蒸气、沸水和无机酸。其它优良特性包括热稳定性、耐蠕变性和固有的阻燃性。 Veradel 3400专用作易于成型的薄壁或流动距离长的零部件。符合FDA标准，可与食物直接接触。 还有其它三个牌号可供：Veradel 3200，低熔体流动速率牌号，可用于挤塑或注塑成型； Veradel 3300 ，中等熔体流动速率牌号，建议用作常规注塑成型；Veradel 3600，极高熔体流动速率牌号，建议用于复合材料，尤其是玻纤或碳纤增强复合材料。 该牌号原来以 Gafone™ PESU销售。&& |
| Product Description | |
|---|---|
| Supplier | Solvay |
| Generic | PES |
| Material Status | Commercial: Active |
| Features | Good flexibility,Good Dimensional Stability,Hydrolysis stability,Flame Characteristics,Acidproof,High Heat Resistance,Good bond,Good Tensile Strength,Moderate liquidity,Solvent resistance,Heat Stabilized,V-0 |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.37 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 380℃，2.16kg | 42 | g/10min | ASTM D1238 |
| Shrinkage rate | |||
| MD | 0.60 | % | ASTM D955 |
| Water absorption rate | |||
| 30days | 1.9 | % | ASTM D570 |
| 24hr | 0.50 | % | ASTM D570 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 2690 | MPa | ASTM D638 |
| tensile strength | 88.9 | MPa | ASTM D638 |
| Tensile strain | |||
| yield | 6.5 | % | ASTM D638 |
| Bending modulus | 2620 | MPa | ASTM D790 |
| bending strength | 125 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 53 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, annealed | 200 | ℃ | ASTM D648 |
| Linear coefficient of thermal expansion | |||
| MD | 5.2E-5 | 1/℃ | ASTM D696 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | 1.7E+15 | ohms·cm | ASTM D257 |
| Dielectric strength | 15 | kV/mm | ASTM D149 |
| Dielectric constant | ASTM D150 | ||
| 60 Hz | 3.51 | ||
| 1 kHz | 3.50 | ||
| 1 MHz | 3.54 | ||
| Dissipation factor | ASTM D150 | ||
| 60 Hz | 1.7E-3 | ||
| 1 kHz | 2.2E-3 | ||
| 1 MHz | 5.6E-3 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 1.50 mm | V-0 | UL 94 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |