Veradel® 3600P

About
Veradel® PESU was formerly marketed as Gafone™ PESU Veradel® 3000P, 3100P, 3200P, 3400P and 3600P are polyethersulfone (PESU) powders for dissolving or dispersing into solutions. They can also be ground to smaller particle size or blended with other solid particles. The grades differ by their molecular weights, with 3000P the highest and 3600P the lowest. There is a direct correlation between molecular weight and solution viscosity. PESU offers excellent toughness and outstanding hydrolytic resistance. It resists attack from steam, boiling water, and mineral acids. Cast films or coatings of PESU are transparent and have additional desirable properties including long term thermal stability, excellent metal adhesion and formability and inherent flame resistance. Typical applications include high-temperature coating formulations, membranes, advanced high-temperature composites, and specialty adhesives.&&

About

Veradel® PESU was formerly marketed as Gafone™ PESU Veradel® 3000P, 3100P, 3200P, 3400P and 3600P are polyethersulfone (PESU) powders for dissolving or dispersing into solutions. They can also be ground to smaller particle size or blended with other solid particles. The grades differ by their molecular weights, with 3000P the highest and 3600P the lowest. There is a direct correlation between molecular weight and solution viscosity. PESU offers excellent toughness and outstanding hydrolytic resistance. It resists attack from steam, boiling water, and mineral acids. Cast films or coatings of PESU are transparent and have additional desirable properties including long term thermal stability, excellent metal adhesion and formability and inherent flame resistance. Typical applications include high-temperature coating formulations, membranes, advanced high-temperature composites, and specialty adhesives.&&

Product Description
Supplier	Solvay
Generic	PES
Material Status	Commercial: Active
Features	Good flexibility,Good Dimensional Stability,High liquidity,Hydrolysis stability,Flame Characteristics,Food contact compliance,Acidproof,High Heat Resistance,Good bond,Good Tensile Strength,Solvent resistance,Low molecular weight,Heat Stabilized
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.37	g/cm³	ASTM D792
Water absorption rate
24hr	0.60	%	ASTM D570
Solution viscosity	275	mPa·s	Internal Method
Residual solvents	0.50	%	Internal Method

THERMAL	Nominal value	Unit	Test method
Glass transition temperature	220	℃	ASTM E1356
Linear coefficient of thermal expansion
MD	4.9E-5	1/℃	ASTM D696

Notes
1. Maximum Temperature of Use: 124°C (356°F)
2. Typical properties: these are not to be construed as specifications.
3. 25% in dimethylacetamide at 40°C
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.