| About |
|---|
| Versaflex™ CL2003X is an ultra-soft TPE designed for use in injection molding applications where exceptional clarity and ultra-soft properties are desired. New Product. Commercial specifications have not been established. Tactile Feel Ultra-Soft Water Clarity&& |
| Product Description | |
|---|---|
| Supplier | Polyone |
| Generic | TPE |
| Material Status | Commercial: Active |
| Features | Good Clarity,Soft |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Shore hardness | |||
| Shaw OO, 10 seconds, 23 ℃ | 33 | ASTM D2240 | |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ASTM D412 | ||
| Fracture, 23 ℃ | 0.896 | MPa | ASTM D412 |
| 100% strain, 23 ℃ | 0.0621 | MPa | ASTM D412 |
| 300% Strain, 73°F | 0.103 | MPa | ASTM D412 |
| Tensile strain | |||
| Fracture, 23 ℃ | 850 | % | ASTM D412 |
| tear strength | 7.01 | kN/m | ASTM D624 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 0.868 | g/cm³ | ASTM D792 |
| Shrinkage rate | |||
| MD | 4.9 to 5.3 | % | ASTM D955 |
| Apparent viscosity of melt | |||
| 200℃，11200 sec^-1 | 1.30 | Pa·s | ASTM D3835 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Proposed maximum recycled material ratio | 20 | % | |
| Barrel rear temperature | 110 to 127 | °C | |
| Barrel middle temperature | 132 to 149 | °C | |
| Barrel front temperature | 138 to 160 | °C | |
| Nozzle temperature | 143 to 171 | °C | |
| Processing (melt) temperature | 143 to 171 | °C | |
| Mold temperature | 13 to 32 | °C | |
| Back pressure | 0.00 to 0.345 | MPa | |
| Screw speed | 25 to 110 | rpm | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Die C |
| 3. 2 hr |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |