| About |
|---|
| Versaflex™ OM 6258-1 is specifically designed to bond to a variety of standard and modified nylon materials, including those which are glass-filled, heat stabilized and/or impact modified. Exceptional Colorability Outstanding Adhesion in Both Two-Shot and Insert Molding Processes Soft, Rubbery Grip Very Easy to Process&& |
| Product Description | |
|---|---|
| Supplier | Polyone |
| Generic | TPE |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good bond,Good coloring |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.09 | g/cm³ | ASTM D792 |
| viscosity | 31 | Pa·s | ASTM D3835 |
| Shrinkage rate | |||
| MD | 1.4 | % | ASTM D995 |
| TD | 2.0 | % | ASTM D995 |
| Other performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Screw speed | 80-120 | rpm | |
| Regional availability | 非洲和中东，亚太地区，欧洲，北美，南美 | ||
| rohs compliance | 通过无铅认证 | ||
| Suggest maximum grinding degree | 20 | % |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shaw’s A10s | 60 | ASTM D2240 | |
| tensile strength | 2.79 | MPa | ASTM D412 |
| tensile strength | 1.90 | MPa | ASTM D412 |
| tensile strength | 2.65 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 390 | % | ASTM D412 |
| tear strength | 18.4 | kN/m | ASTM D624 |
| Compression deformation | 23 | % | ASTM D395B |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Injection temperature | |||
| Rear barrel temperature | 182-204 | °C | |
| Central temperature of the barrel | 243-266 | °C | |
| Barrel front temperature | 249-271 | °C | |
| Die temperature | 254-277 | °C | |
| Mold temperature | 12.8-29.4 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Die C |
| 3. 2 hr |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |