| About |
|---|
| Versalloy™ XL 9055X-9 is a TPV alloy with exceptional flow properties and surface aesthetics for a variety of applications. Excellent Flow for Long, Thin Flow Paths Overmold Adhesion to Polypropylene Superior Surface Aesthetics Very Good Mar Resistance&& |
| Product Description | |
|---|---|
| Supplier | Polyone |
| Generic | TPE |
| Material Status | Commercial: Active |
| Features | Good surface appearance,Renewable resources,Good liquidity |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.888 | g/cm³ | ASTM D792 |
| Shrinkage rate | |||
| MD | 1.6 | % | ASTM D995 |
| TD | 2.2 | % | ASTM D995 |
| viscosity | 5.9 | Pa·s | ASTM D3835 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 22 | g/10min | ASTM D1238 |
| 200℃，5.0kg | 390 | g/10min | ASTM D1238 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 1.50mm | HB | UL-94 |
| Other performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Screw speed | 50-100 | rpm | |
| Regional availability | 非洲和中东，亚太地区，欧洲，北美，南美 | ||
| rohs compliance | 通过无铅认证 | ||
| Suggest maximum grinding degree | 20 | % |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shaw’s A10s | 53 | ASTM D2240 | |
| tensile strength | 4.02 | MPa | ASTM D412 |
| tensile strength | 1.45 | MPa | ASTM D412 |
| tensile strength | 2.31 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 610 | % | ASTM D412 |
| tear strength | 21.0 | kN/m | ASTM D624 |
| Compression deformation | 23 | % | ASTM D395B |
| Compression deformation | 38 | % | ASTM D395B |
| Compression deformation | 43 | % | ASTM D395B |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Injection temperature | |||
| Rear barrel temperature | 149-188 | °C | |
| Central temperature of the barrel | 160-199 | °C | |
| Barrel front temperature | 171-210 | °C | |
| Die temperature | 171-210 | °C | |
| Mold temperature | 15.6-26.7 | °C | |
| Notes |
|---|
| 1. Please contact GLS Thermoplastic Elastomers for a copy of the FDA compliance letter. |
| 2. Typical properties: these are not to be construed as specifications. |
| 3. Die C |
| 4. 2 hr |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |