About |
---|
VERSIFY™ 2400 弹性体是一种低熔流率的树脂,适用于挤出和流延加工。该树脂与PP具有优异的相容性,可赋予产品以柔软度和高温性能。 主要特性 粒料 熔流率低 易流动 与PP相容 软质聚丙烯 结晶度低 应用领域 膜制品 高填充材料 挤出加工 符合以下法规: EU, No 10/2011 美国食品和药物管理局 FCN 909 美国食品和药物管理局法规 21 CFR 175.105(c)(5) 请查询法规以获取完备的细节资料。 |
Product Description | |
---|---|
Supplier | DOW |
Generic | Polyolefin Elastomer |
Material Status | Commercial: Active |
Availabilitys | North America,Latin America,Asia Pacific,Europe |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
Density | 0.863 | g/cm³ | ASTM D792 |
Melt Flow Rate | |||
230℃,2.16kg | 2.0 | g/10min | ASTM D1238 |
Summary of crystallinity | 12 | % | Internal Method |
THERMAL | Nominal value | Unit | Test method |
---|---|---|---|
Glass transition temperature | -30.0 | ℃ | Internal Method |
Vicat Softening Temp | 42.0 | ℃ | ASTM D1525 |
optical performance | Nominal value | Unit | Test method |
---|---|---|---|
Haze | |||
2000 µ m, injection molding | 5.0 | % | ASTM D1003 |
MECHANICAL | Nominal value | Unit | Test method |
---|---|---|---|
Shore hardness | |||
Shaw A, molded | 79 | ||
Shaw’s D, molded | 26 | ||
Tensile strength (fracture, molded) | 6.00 | MPa | ASTM D638 |
Tensile strain | |||
Fracture, molded | 11 | % | ASTM D638 |
Bending modulus | |||
1% cut, molded | 26.0 | MPa | ASTM D790 |
Notes |
---|
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |