| About |
|---|
| Low viscosity and heat stabilized PA12 compound developed for the manufacturing of thermoplastic composite tapes. VESTAMID®NRG 1003 is characterized by excellent bonding to reinforcement fibres. The material has an excellent compatibility against hydrocarbons (i.e. crude oil) and oilfield chemicals (i.e. paraffin inhibitors) resulting in high dimensional stability and unaffected properties of parts in contact with those. The typical characteristics of PA 12 are low water absorption, good dimensional stability and almost unchanged properties at varying ambient humidity. Typical temperatures for processing are 200°C-240°C.&& |
| Product Description | |
|---|---|
| Supplier | Evonik |
| Generic | PA12 |
| Material Status | Commercial: Active |
| Features | Good Dimensional Stability,Low Viscosity,Agglomerability |
| Availabilitys | North America,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.01 | g/cm³ | ISO 1183 |
| Viscosity number | 100 | cm³/g | ISO 307 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 1400 | MPa | ISO 527-2 |
| tensile strength | |||
| yield | 46.0 | MPa | ISO 527-2 |
| Tensile strain | ISO 527-2 | ||
| yield | 5.0 | % | ISO 527-2 |
| fracture | > 200 | % | ISO 527-2 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30 ℃, completely fractured | 4.0 | kJ/m² | ISO 179/1eA |
| 23 ℃, completely fractured | 5.0 | kJ/m² | ISO 179/1eA |
| Charpy Unnotch Impact strength | ISO 179/1eU | ||
| -30℃ | 无断裂 | ISO 179/1eU | |
| 23℃ | 无断裂 | ISO 179/1eU |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 120 | ℃ | ISO 75-2/B |
| 1.8 MPa, unannealed | 50.0 | ℃ | ISO 75-2/A |
| Vicat Softening Temp | |||
| — | 170 | ℃ | ISO 306/A |
| — | 140 | ℃ | ISO 306/B |
| Melting temperature | 178 | ℃ | ISO 11357-3 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 2nd heating |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |