| About |
|---|
| For Gas Pipes and Fittings VESTAMID® NRG 2101 yellow is a high molecular grade PA 12 material developed by Evonik. Its superior performance characteristics make it an ideal choice for expanding the use of thermoplastic piping systems at higher operating pressures and larger diameters to replace metallic piping systems in a safe and cost effective manner. Besides extending the operating pressure limits of thermoplastic piping systems, VESTAMID® NRG 2101 yellow offers many of the same benefits, and in most instances more superior performance, as conventional PE piping systems. Tough and durable Corrosion resistant Resistant to heavy hydrocarbons High resistance to Slow Crack Growth and Rapid Crack Propagation Increased installation efficiencies Worry free performance These characteristics make the VESTAMID® NRG 2101 yellow material an ideal choice when selecting appropriate thermoplastic piping materials in extending your gas distribution infrastructure.&& |
| Product Description | |
|---|---|
| Supplier | Evonik |
| Generic | PA12 |
| Material Status | Commercial: Active |
| Features | Good flexibility,High molecular weight,Durability,Hydrocarbons |
| Availabilitys | North America,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.02 | g/cm³ | ISO 1183 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Unnotch Impact strength | |||
| -40℃ | 无断裂 | ISO 179/1eU |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 170 | ℃ | ISO 306/A |
| Melting temperature | 177 | ℃ | ISO 11357-3 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Slow crack propagation PENT | |||
| 2.4 MPa，80℃ | > 2000 | hr | ASTM F1473 |
| RCP | ISO 13477 | ||
| FST critical pressure：0℃ | 3.00 | MPa | ISO 13477 |
| S4 critical pressure：0℃ | 0.270 | MPa | ISO 13477 |
| Strength（Maximum Required，20℃） | 18.0 | MPa | ISO 9277 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 73 | ISO 868 | |
| Ball hardness | 76.0 | MPa | ISO 2039-1 |
| Tensile modulus | 1350 | MPa | ISO 527-2 |
| tensile strength | |||
| yield | 40.0 | MPa | ISO 527-2 |
| Tensile strain | ISO 527-2 | ||
| yield | 12 | % | ISO 527-2 |
| fracture | > 150 | % | ISO 527-2 |
| Slow crack growth in cut pipe materials | |||
| 20 bar，20% notched | > 2000 | hr | |
| Fundamentals of Hydrostatic Design | |||
| 20℃ | 21.7 | MPa | |
| 60℃ | 13.8 | MPa |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Extrusion | Nominal value | Unit | Test method |
| Drying temperature | 80 | °C | |
| Drying time | 2.0 to 4.0 | hr | |
| Processing (melt) temperature | 230 to 280 | °C | |
| Mold temperature | 60 to 100 | °C | |
| Drying temperature | 80 | °C | |
| Drying time | 2.0 to 4.0 | hr | |
| Melt temperature | 230 to 280 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. H 30 |
| 3. 2nd heating |
| 4. 110mm SDR 11 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |