| About |
|---|
| Medium viscosity polyamide 1010 VESTAMID®Terra DS16 natural color is a medium viscosity PA 1010 basic polymer. VESTAMID Terra DS16 is semi-crystalline, which is the reason for its high mechanical resistance and chemical stability. It absorbs only little water. As a result its mechanical properties vary little when exposed to changing environmental humidity, and the material features a high dimensional stability. VESTAMID®Terra DS16 can be used to manufacture films with good transparency. The high melting point of VESTAMID Terra DS16 compounds results in a high heat deflection temperature that can be advantageous for some applications. VESTAMID®Terra DS16 occupies a position between the high-performance long-chain polyamides such as PA 12 and PA 1212 and the standard polyamides PA 6 and PA 66, which have a shorter chain length. Because of its chemical and physical properties, and the plant origin of its monomers, VESTAMID Terra DS16 is an interesting addition to conventional longer-chain polyamides, and it also meets the growing demand for materials made from renewable raw materials. VESTAMIDTerra DS16 natural color is supplied as cylindrical granules, ready for processing, in moisture-proof bags. VESTAMID® Terra is a group of new polyamides, the monomers for which are based entirely or partly on renewable raw materials. VESTAMID® Terra DS is the polycondensation product of 1,10-decamethylene diamine (D) and 1,10-decanedioic acid (sebacic acid—S). Because both monomers are extracted from castor oil, VESTAMID® Terra DS is based on natural, renewable resources up to 100%. Global Warming Potential (GWP) 2.8 kg CO2 By Evonik, PE International.&& |
| Product Description | |
|---|---|
| Supplier | Evonik |
| Generic | PA 1010 |
| Material Status | Commercial: Active |
| Features | Good Clarity,Good Dimensional Stability,Renewable resources,Low or no water absorption,Hypocrystalline |
| Availabilitys | North America,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.05 | g/cm³ | ISO 1183 |
| Water absorption rate | |||
| Saturation, 23 ℃ | 1.8 | % | ISO 62 |
| Viscosity number | 160 | cm³/g | ISO 307 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 1700 | MPa | ISO 527-2 |
| tensile strength | |||
| yield | 54.0 | MPa | ISO 527-2 |
| Tensile strain | ISO 527-2 | ||
| yield | 5.0 | % | ISO 527-2 |
| fracture | > 50 | % | ISO 527-2 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30 ℃, completely fractured | 7.0 | kJ/m² | ISO 179/1eA |
| 23 ℃, completely fractured | 7.0 | kJ/m² | ISO 179/1eA |
| Charpy Unnotch Impact strength | ISO 179/1eU | ||
| -30℃ | 无断裂 | ISO 179/1eU | |
| 23℃ | 无断裂 | ISO 179/1eU |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | |||
| — | 196 | ℃ | ISO 306/A |
| — | 171 | ℃ | ISO 306/B |
| Melting temperature | 200 | ℃ | ISO 11357 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Renewable Carbon Conent | 100 | % | ASTM D6866 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 2nd heating |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |