| About |
|---|
| VESTOLIT E 7012 S is a paste-forming homopolymers suitable for production of low to medium viscosity pastes with pseudo-plastic flow. The properties of the product is particularly suited to the production of soft to medium chemical foams.&& |
| Product Description | |
|---|---|
| Generic | PVC homopolymer |
| Material Status | Commercial: Active |
| Features | Good liquidity,Low Viscosity,Foaming performance,Homopolymer |
| Availabilitys | Europe |
| Process Methods | Foam treatment |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Apparent density | 0.40 | g/cm³ | ISO 60 |
| K-value | 67 | ISO 1628-2 | |
| viscosity | 112 | ml/g | ISO 1628 |
| PH value | 7.0 | ISO 1264 | |
| moisture content | <0.40 | % | DIN 53715 |
| Sieve analysis | <1.0 | % | ISO 1624 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 0.063 mm sieve |
| 3. 1.5 /s |
| 4. 45 /s |
| 5. Karl Fisher |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |