| About |
|---|
| VESTOLIT P 1382 K is an emulsion (E) PVC modified with 20% acrylate. By virtue of this modification with acrylate, VESTOLIT P 1682 K is suitable for use as an additive to S-, M- and E-{VC for the production of increased or highly impact resistance pigmented or translucent products.&& |
| Product Description | |
|---|---|
| Generic | PVC, not specified |
| Material Status | Commercial: Active |
| Features | Good surface appearance,High impact resistance,Good dissection |
| Availabilitys | Europe |
| Process Methods | Profile extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Apparent density | 0.49 | g/cm³ | ISO 60 |
| K-Value | 60.0 | ISO 1628-2 | |
| Methacrylic acid content | 20.0 | wt% | |
| Particle size distribution | ISO 4610 | ||
| — | > 85 | % | ISO 4610 |
| — | < 30 | % | ISO 4610 |
| water content | < 0.30 | % | DIN 53715 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 0.25 mm sieve |
| 3. 0.063 mm sieve |
| 4. Karl Fisher |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |