| About |
|---|
| Polyamide 12 fluidized bed coating powder VESTOSINT 1101 white is the standard fluidized bed coating powder based on polyamide 12. It is most suitable for the coating of wire goods.&& |
| Product Description | |
|---|---|
| Supplier | Evonik |
| Generic | PA12 |
| Material Status | Commercial: Active |
| Availabilitys | North America,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.06 | g/cm³ | ISO 1183 |
| Apparent density | > 0.50 | g/cm³ | ISO 60 |
| Water absorption rate | ISO 62 | ||
| Saturation, 100 ℃ | 1.7 | % | ISO 62 |
| Saturation, 23 ℃ | 1.2 | % | ISO 62 |
| Equilibrium, 23 ℃, 50% RH | 0.50 | % | ISO 62 |
| Particle size distribution | ISO 4610 | ||
| < 32.0 µm | wt% | ISO 4610 | |
| < 100.0 µm | > 45.0 | wt% | ISO 4610 |
| < 250.0 µm | 100.0 | wt% | ISO 4610 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | |||
| DSC | 176 | ℃ | ISO 3146 |
| Linear coefficient of thermal expansion | |||
| MD：23~55℃ | 1.0E-4 | 1/℃ | ISO 11359-2 |
| specific heat | 2270 | J/kg/℃ | ASTM C351 |
| Thermal conductivity coefficient | 0.22 to 0.27 | W/m/K | DIN 52612 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | 1.0E+15 | ohms·cm | IEC 60093 |
| Dielectric strength | 85 | kV/mm | IEC 60243-1 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 75 | ISO 868 | |
| Ball hardness | 101 | MPa | ISO 2039-1 |
| Taber abraser | |||
| 100 cycles, 500 g, CS-17 wheels | < 1.00 | mg | ASTM D1242 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 96%RH |
| 3. H30 |
| 4. K20/P50 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |