| About |
|---|
| Powder for coating systems VESTOSINT 2070 natural color is a polyamide 12 fine powder for the use in liquid coating systems. It is used as an additive, for instance, in coil coating systems to improve abrasion resistance and T-bend test.&& |
| Product Description | |
|---|---|
| Supplier | Evonik |
| Generic | PA12 |
| Material Status | Commercial: Active |
| Availabilitys | North America,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.02 | g/cm³ | ISO 1183 |
| Apparent density | > 0.15 | g/cm³ | ISO 60 |
| Water absorption rate | ISO 62 | ||
| Saturation, 100 ℃ | 1.9 | % | ISO 62 |
| Saturation, 23 ℃ | 1.3 | % | ISO 62 |
| Equilibrium, 23 ℃, 50% RH | 0.50 | % | ISO 62 |
| Average particle size | 5.0 | µm | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | |||
| DSC | 184 | ℃ | ISO 3146 |
| Linear coefficient of thermal expansion | |||
| MD：23~55℃ | 1.1E-4 | 1/℃ | ISO 11359-2 |
| specific heat | 2350 | J/kg/℃ | DIN 53765 |
| Thermal conductivity coefficient | 0.23 to 0.29 | W/m/K | DIN 52612 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | 1.0E+14 | ohms·cm | IEC 60093 |
| Dielectric strength | 90 | kV/mm | IEC 60243-1 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 75 | ISO 868 | |
| Ball hardness | 90.0 | MPa | ISO 2039-1 |
| tensile strength | |||
| yield | 43.0 | MPa | ISO 527-2 |
| Tensile strain | ISO 527-2 | ||
| yield | 6.0 | % | ISO 527-2 |
| fracture | > 100 | % | ISO 527-2 |
| Taber abraser | |||
| 100 cycles, 500 g, CS-17 wheels | < 1.00 | mg | ASTM D1242 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |