| About |
|---|
| Product Description | |
|---|---|
| Generic | PET |
| Material Status | Commercial: Active |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Injection shrinkage rate | 0.3-0.6 | % | ASTM D-955 |
| Density | 1.68 | g/cm³ | ASTM D-792 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature (1.82 MPa) | 245 | ℃ | ASTM D-648 |
| Flame retardancy (UL-94) | Vo |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Bending modulus of elasticity | 7500 | MPa | ASTM D-790 |
| bending strength | 175 | MPa | ASTM D-790 |
| tensile strength | 143 | MPa | ASTM D-638 |
| Izod notch impact strength | 115 | J/m | ASTM D-256 |
| elongation at break | 2.5 | % | ASTM D-638 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | 1015 | Ω.cm | ASTM D-257 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |