Vibrathane® 6060

About
VIBRATHANE 6060 is a polycaprolactone based TDI terminated liquid urethane prepolymer that is readily processable by conventional hand and machine mixing techniques. When cured with 4,4′-methylene-bis(2-chloroaniline), this member of the VIBRATHANE family produces high quality vulcanizates in the 60 Shore A hardness range. These tough, high resilience elastomers are characterized by: Low hardness Excellent Abrasion Resistance Low Compression Set This unusual prepolymer yields a high performance 60A elastomer when cured with MBCA, thereby avoiding the need for mixed curatives or plasticizers which are usually required to achieve hardnesses in this range. VIBRATHANE 6060 is a high quality product designed for use in high wear mining applications. Its long pot life and low viscosity are attributes that facilitate the casting of large as well as small fabricated parts.&&

About

VIBRATHANE 6060 is a polycaprolactone based TDI terminated liquid urethane prepolymer that is readily processable by conventional hand and machine mixing techniques. When cured with 4,4′-methylene-bis(2-chloroaniline), this member of the VIBRATHANE family produces high quality vulcanizates in the 60 Shore A hardness range. These tough, high resilience elastomers are characterized by: Low hardness Excellent Abrasion Resistance Low Compression Set This unusual prepolymer yields a high performance 60A elastomer when cured with MBCA, thereby avoiding the need for mixed curatives or plasticizers which are usually required to achieve hardnesses in this range. VIBRATHANE 6060 is a high quality product designed for use in high wear mining applications. Its long pot life and low viscosity are attributes that facilitate the casting of large as well as small fabricated parts.&&

Product Description
Supplier	Chemtura
Generic	PUR-Capro+TDI
Material Status	Commercial: Active
Features	Good flexibility,Good Dimensional Stability,Low Viscosity,Elastic,Low Hardness,Good wear resistance
Availabilitys	North America,Latin America,Asia Pacific,Europe
Process Methods	casting

Technical Data
elastic body	Nominal value	Unit	Test method
tensile strength			ASTM D412
100% strain	2.07	MPa	ASTM D412
300% strain	3.45	MPa	ASTM D412
tensile strength	30.3	MPa	ASTM D412
Tensile strain
fracture	480	%	ASTM D412
tear strength
—	33.3	kN/m	ASTM D624
cracking	3.9	kN/m	ASTM D470
Compression deformation
70℃，22 hr	6.0	%	ASTM D395B
Basho’s elasticity	30	%	ASTM D2632

Uncured Properties	Nominal value	Unit	Test method
Curing time
115℃	1.0	hr

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	62		ASTM D2240
compressive strength			ASTM D695
5% strain	0.276	MPa	ASTM D695
10% strain	0.552	MPa	ASTM D695
15% strain	0.896	MPa	ASTM D695
20% strain	1.24	MPa	ASTM D695
25% strain	1.65	MPa	ASTM D695
Taber abraser
1000 cycles, 100 g, H-18 wheels	23.9	mg	ASTM D1044

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	-57.0	℃	ASTM D746
Thermosetting components
resin	按重量计算的混合比: 100
Hardening method	按重量计算的混合比: 10
storage stability	9.0	min
Post curing time
115℃	16	hr

Notes
1. Typical properties: these are not to be construed as specifications.
2. Die C
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.