| About |
|---|
| VIBRATHANE 8090 is a TDI-terminated polyester-based prepolymer, which yields a 90 Shore A hardness urethane when cured with 4,4′-methylene bis (orthochloroaniline). Elastomers with hardness down to 60 Shore A can also be obtained with VIBRATHANE 8090 by curing with MBCA-triol blends. VIBRATHANE 8090 elastomers are characterized by: High tensile and tear properties Outstanding abrasion resistance Excellent heat, fuel and solvent resistance High load-bearing and dynamic properties&& |
| Product Description | |
|---|---|
| Supplier | Chemtura |
| Generic | PUR-酯+TDI |
| Material Status | Commercial: Active |
| Features | High Heat Resistance,Good Tensile Strength,Good tear strength,Good wear resistance,Solvent resistance,Fuel resistance |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.25 | g/cm³ | ASTM D792 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 89 | ASTM D2240 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ASTM D412 | ||
| 100% strain | 6.89 | MPa | ASTM D412 |
| 300% strain | 14.1 | MPa | ASTM D412 |
| tensile strength | 48.3 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 460 | % | ASTM D412 |
| tear strength | |||
| — | 103 | kN/m | ASTM D624 |
| cracking | 25 | kN/m | ASTM D470 |
| Compression deformation | |||
| 70℃，22 hr | 25 | % | ASTM D395B |
| Basho’s elasticity | 27 | % | ASTM D2632 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Thermosetting components | |||
| resin | 按重量计算的混合比: 100 | ||
| Hardening method | 按重量计算的混合比: 12 | ||
| storage stability | 5.0 | min | |
| Post curing time | |||
| 100℃ | 16 | hr |
| Uncured Properties | Nominal value | Unit | Test method |
|---|---|---|---|
| Curing time | |||
| 100℃ | 0.50 | hr |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Die C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |