Vibrathane® 8585

About
VIBRATHANE 8585 is a polyester based, MDI terminated liquid urethane prepolymer that exhibits Chemtura’s advanced technology in this vital area of the polyurethane industry. This new prepolymer is highly unique in its resistance to heat aging and its uniform, predictable response to the addition of catalyst. (See figure 1). When cured with 1,4 – Butanediol, this member of the VIBRATHANE family produces high quality vulcanizates in the 85 Shore A hardness range. These tough, high quality elastomers are characterized by: High Tear Strength Excellent Abrasion Resistance Good Solvent Resistance VIBRATHANE 8585, at processing temperature, is low in viscosity and has a working life suitable for both machine and hand-batching procedures.&&

About

VIBRATHANE 8585 is a polyester based, MDI terminated liquid urethane prepolymer that exhibits Chemtura’s advanced technology in this vital area of the polyurethane industry. This new prepolymer is highly unique in its resistance to heat aging and its uniform, predictable response to the addition of catalyst. (See figure 1). When cured with 1,4 – Butanediol, this member of the VIBRATHANE family produces high quality vulcanizates in the 85 Shore A hardness range. These tough, high quality elastomers are characterized by: High Tear Strength Excellent Abrasion Resistance Good Solvent Resistance VIBRATHANE 8585, at processing temperature, is low in viscosity and has a working life suitable for both machine and hand-batching procedures.&&

Product Description
Supplier	Chemtura
Generic	PUR-酯+MDI
Material Status	Commercial: Active
Features	Good heat aging resistance,Good flexibility,Low Viscosity,Good tear strength,Good wear resistance,Solvent resistance
Availabilitys	North America,Latin America,Asia Pacific

Technical Data
elastic body	Nominal value	Unit	Test method
tensile strength			ASTM D412
100% strain	4.41	MPa	ASTM D412
300% strain	12.0	MPa	ASTM D412
tensile strength	47.2	MPa	ASTM D412
Tensile strain
fracture	670	%	ASTM D412
tear strength
—	91.1	kN/m	ASTM D624
cracking	19	kN/m	ASTM D470
Compression deformation
70℃，22 hr	30	%	ASTM D395B
Basho’s elasticity	30	%	ASTM D2632

THERMAL	Nominal value	Unit
Thermosetting components
resin	按重量计算的混合比: 100
Hardening method	按重量计算的混合比: 6.8
storage stability	6.0	min
Post curing time
100℃	16	hr

Uncured Properties	Nominal value	Unit	Test method
Curing time
115℃	1.0	hr

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	85		ASTM D2240
compressive strength			ASTM D695
5% strain	1.07	MPa	ASTM D695
10% strain	1.93	MPa	ASTM D695
15% strain	2.83	MPa	ASTM D695
20% strain	3.90	MPa	ASTM D695
25% strain	5.03	MPa	ASTM D695

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.