| About |
|---|
| High performance thermoplastic material, unreinforced PolyEtherKetone (PEK), semi crystalline, fine powder for compression moulding, easy flow, FDA food contact compliant, colour natural.&& |
| Product Description | |
|---|---|
| Supplier | Victrex |
| Material Status | Commercial: Active |
| Features | Good liquidity,Food contact compliance,Hypocrystalline |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Tensile Modulus | |||
| 23℃ | 4300 | MPa | ISO 527-2 |
| Tensile Strength | |||
| Yield yld, 23 ℃ | 100 | MPa | ISO 527-2 |
| Tensile Strain | |||
| Broken BRK, 23 ℃ | 10 | % | ISO 527-2 |
| Flexural Modulus | |||
| 23℃ | 4000 | MPa | ISO 178 |
| Flexural Strength | |||
| 23℃ | 170 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Izod Notched Impact strength | |||
| 23℃ | 4.5 | kJ/m² | ISO 180-A |
| Izod Unnotched Impact strength of cantilever beam | |||
| 23℃ | 无断裂 | ISO 180 |
| Supplementary Information | Nominal value | Unit | Test method |
|---|---|---|---|
| Compression molding temperature | 400 to 420 | ℃ | |
| Drying temperature | 120 to 150 | ℃ |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 1.30 | g/cm³ | ISO 1183 |
| Apparent density | 0.30 | g/cm³ | ISO 1183 |
| Average particle size | |||
| d50 | 50 | µm | ISO 13320-1 |
| Apparent viscosity | |||
| 400℃ | 190 | Pa·s | ISO 11443 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass Transition Temperature | ISO 11357-2 | ||
| — | 152 | ℃ | ISO 11357-2 |
| — | 160 | ℃ | ISO 11357-2 |
| Melting temperature | 373 | ℃ | ISO 11357-3 |
| Drying time | 3.0 to 5.0 | hr |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Crystalline |
| 3. Onset |
| 4. Midpoint |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |