| About |
|---|
| High performance thermoplastic material, unreinforced PolyEtherEtherKetone (PEEK), semi crystalline, fine powder for compression moulding, easy flow, FDA food contact compliant, colour natural.&& |
| Product Description | |
|---|---|
| Supplier | Victrex |
| Material Status | Commercial: Active |
| Features | Hypocrystalline,Good liquidity,Food contact compliance |
| Availabilitys | Asia Pacific,Latin America,Europe,Africa & Middle East ,North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.30 | g/cm³ | ISO 1183 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| 23℃ | 100 | MPa | ISO 527-2 |
| Tensile strain | |||
| Fracture, 23 ℃ | 15 | % | ISO 527-2 |
| Tensile modulus | |||
| 23℃ | 3700 | MPa | ISO 527-2 |
| bending strength | |||
| 23℃ | 170 | MPa | ISO 178 |
| Bending modulus | |||
| 23℃ | 4100 | MPa | ISO 178 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 343 | ℃ | ISO 11357-3 |
| Glass transition temperature | 143 | ℃ | ISO 11357-2 |
| Vicat Softening Temp |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 4.5 | kJ/m² | ISO 180-1A |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 120 -150 | °C | |
| Drying time | 3.0-5.0 | Hr | |
| Injection temperature | |||
| Rear barrel temperature | 365 | °C | |
| Central temperature of the barrel | 370 | °C | |
| Barrel front temperature | 380 | °C | |
| Die temperature | 385 | °C | |
| Mold temperature | 180-210 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Onset |
| 3. Midpoint |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |