Vikalloy IM88 - SOLIAO

About
IM88 low smoke injection molding compound is a proprietary, high performance compound designed for use in mass transit vehicles such as subways, vans, buses, and trains. It meets the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FTA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162. It is the ideal material for parts used in rail and transit applications.&&

About

IM88 low smoke injection molding compound is a proprietary, high performance compound designed for use in mass transit vehicles such as subways, vans, buses, and trains. It meets the recommended fire safety practices of both the Federal Transit Administration (FTA) and the Federal Rail Administration (FTA) for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162. It is the ideal material for parts used in rail and transit applications.&&

Product Description
Generic	PMMA+PVC
Material Status	Commercial: Negative
Features	Clean,Flame Characteristics,Solvent resistance
Availabilitys	North America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.38	g/cm³	ASTM D792
Shrinkage rate
MD	0.20 to 0.40	%	ASTM D955

MECHANICAL	Nominal value	Unit	Test method
tensile strength	41.4	MPa	ASTM D638
Tensile strain
fracture	55	%	ASTM D638
Bending modulus	2410	MPa	ASTM D790
bending strength	63.4	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	110	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, annealed	77.8	℃	ASTM D648

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	54	°C
Drying time	4.0	hr
Barrel middle temperature	157 to 196	°C
Barrel front temperature	157 to 196	°C
Processing (melt) temperature	196 to 207	°C
Mold temperature	32 to 60	°C
Back pressure	0.689 to 2.76	MPa

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.