Vinnolit® E 67 FF

About
PVC for paste making ® Vinnolit E 67 FF is a fine particle size, low- medium molecular weight emulsion type PVC homopolymer with a medium emulsifier content. It produces plastisols exhibiting medium viscosity at low and high shear rates with essentially Newtonian flow properties with low plasticizer levels (40-60 phr). It has been particularly developed for low plasticizer content compact or chemically foamed formulations. It exhibits generally excellent gelation/fusion rates and gives good thermal/light stability with a wide range of stabilisers. The use of high speed type mixers is recommended. Processing and Application: Vinnolit E 67 FF produces plastisols with low plasticizer content which are ideal for the spread coating of chemically blown foams for cushioned flooring and wallcoverings using the “Congoleum” process, where a very fine closed cell structure with excellent inhibition and contour sharpness may be achieved at both high and low expansion levels. Plastisols can be applied by reverse-roll coaters, rotary screen coaters.&&

About

PVC for paste making ® Vinnolit E 67 FF is a fine particle size, low- medium molecular weight emulsion type PVC homopolymer with a medium emulsifier content. It produces plastisols exhibiting medium viscosity at low and high shear rates with essentially Newtonian flow properties with low plasticizer levels (40-60 phr). It has been particularly developed for low plasticizer content compact or chemically foamed formulations. It exhibits generally excellent gelation/fusion rates and gives good thermal/light stability with a wide range of stabilisers. The use of high speed type mixers is recommended. Processing and Application: Vinnolit E 67 FF produces plastisols with low plasticizer content which are ideal for the spread coating of chemically blown foams for cushioned flooring and wallcoverings using the “Congoleum” process, where a very fine closed cell structure with excellent inhibition and contour sharpness may be achieved at both high and low expansion levels. Plastisols can be applied by reverse-roll coaters, rotary screen coaters.&&

Product Description
Generic	PVC, not specified
Material Status	Commercial: Active
Features	Plasticizing,Heat Stabilized,Homopolymer
Availabilitys	Europe
Process Methods	Foam treatment

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Apparent density	0.40	g/cm³	ISO 60
K-Value	67.0		ISO 1628-2
Viscosity value
Reduced viscosity	113.0	ml/g	ISO 1628-2
Volatiles	< 0.30	%	ISO 1269
Particle size distribution	< 0.20	%	ISO 1624

Notes
1. Typical properties: these are not to be construed as specifications.
2. retained on 0.063 mm screen
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.