| About |
|---|
| Vinnolit E 69 ST is a very fine-particle, paste-making emulsion homopolymer, giving medium viscosity plastisols with a good shelf life. Plastisols made with Vinnolit E 69 ST have a slightly pseudoplastic rheology. Vinnolit E 69 ST exhibits excellent foaming characteristics in chemically blown foams. Due to its outstanding low coarse particle content and white colour it is recommended for foamed wall coverings made by rotary screen printing or hot embossing.&& |
| Product Description | |
|---|---|
| Generic | PVC homopolymer |
| Material Status | Commercial: Active |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Apparent density | 0.38 | g/cm³ | ISO 60 |
| K-Value | 68.0 | ISO 1628-2 | |
| Viscosity value | |||
| Reduced viscosity | 116.0 | ml/g | ISO 1628 |
| Emulsifier Content | Medium | ||
| Volatiles | < 0.30 | % | ISO 1269 |
| Particle size distribution | < 0.10 | % | ISO 4610 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. retained on 0.063 mm screen |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |