Vinnolit® P 70

About
Vinnolit P 70 is a fine grained homopolymer for plastisol processing giving low-viscosity plastisols with an excellent shelf life. Vinnolit P 70 pastes with a medium plasticizer content show a Newtonian rheology at low shear rates (Brookfield) and moderate dilatant rheology at high shear rates. The dilatancy can readily be reduced or even eliminated by blending with extender resins such as Vinnolit C 65 V (see diagram) or Vinnolit C 66 W or special emulsion grades. Vinnolit P 70 has outstanding water resistance and high thermostability/weatherability and is thus ideally suited for long term outdoor applications, e.g., textile constructions, roofing sheets, tar-paulins, awnings, coil coating, decorative films and, owing to its high transparency, for trans-parent top coats.&&

About

Vinnolit P 70 is a fine grained homopolymer for plastisol processing giving low-viscosity plastisols with an excellent shelf life. Vinnolit P 70 pastes with a medium plasticizer content show a Newtonian rheology at low shear rates (Brookfield) and moderate dilatant rheology at high shear rates. The dilatancy can readily be reduced or even eliminated by blending with extender resins such as Vinnolit C 65 V (see diagram) or Vinnolit C 66 W or special emulsion grades. Vinnolit P 70 has outstanding water resistance and high thermostability/weatherability and is thus ideally suited for long term outdoor applications, e.g., textile constructions, roofing sheets, tar-paulins, awnings, coil coating, decorative films and, owing to its high transparency, for trans-parent top coats.&&

Product Description
Generic	PVC homopolymer
Material Status	Commercial: Active
Features	Weather resistance is good,Good Clarity,Low Viscosity,Moisture resistance,Heat Stabilized
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Apparent density	0.36	g/cm³	ISO 60
K-Value	70.0		ISO 1628-2
Viscosity value
Reduced viscosity	124.0	ml/g	ISO 1628
Emulsifier Content	Extremely Low
Volatiles	< 0.30	%	ISO 1269
Particle size distribution	< 0.30	%	ISO 4610

Notes
1. Typical properties: these are not to be construed as specifications.
2. retained on 0.063 mm screen
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.