| About |
|---|
| Vinnolit S 4170 AOF is a highly porous and antioxidantfree suspension polymer that is recommended for extrusion, calendering and injection moulding of flexible PVC.&& |
| Product Description | |
|---|---|
| Generic | PVC, not specified |
| Material Status | Commercial: Active |
| Availabilitys | Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Apparent density | 0.48 | g/cm³ | ISO 60 |
| K-Value | 70.0 | ISO 1628-2 | |
| Viscosity value | |||
| Reduced viscosity | 124.0 | ml/g | ISO 1628 |
| Volatiles | < 0.30 | % | ISO 1269 |
| Particle size distribution | ISO 4610 | ||
| — | > 98 | % | ISO 4610 |
| — | < 1.0 | % | ISO 4610 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Plasticizer absorption | |||
| 23℃ | 34 | % | ISO 4608 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. retained on 0.250 mm screen |
| 3. retained on 0.063 mm screen |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |