| About |
|---|
| Vinnolit VK 710 is a free-flowing powder produced by graft polymerization of vinyl chloride onto polyacrylate (ACR). The product contains roughly 50 % ACR. Vinnolit VK 710 is a thermoplastic elastomer (TPE). It combines the positive properties of PVC with those of rubber.&& |
| Product Description | |
|---|---|
| Generic | PVC alloy |
| Material Status | Commercial: Active |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Apparent density | 0.65 | g/cm³ | ISO 60 |
| ACR Content | 50 | % | |
| Volatiles | < 0.50 | % | ISO 1269 |
| Particle size distribution | ISO 4610 | ||
| — | > 70 | % | ISO 4610 |
| — | < 0.50 | % | ISO 4610 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. retained on 0.063 mm screen |
| 3. retained on 0.500 mm screen |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |