Viprene™ G75A-32U-BLK

About
Viprene™ G75A-32U-BLK is a UV and Heat Stabilized TPV (thermoplastic vulcanizate elastomer). This material can be easily procesed by extrusion or injection molding. It exhibits easy flowing characteristics.&&

Product Description
Generic	TPV
Material Status	Commercial: Active
Features	Good liquidity,Food contact compliance,Good coloring,HB
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.970	g/cm³	ISO 2781

elastic body	Nominal value	Unit	Test method
tensile strength
fracture	8.50	MPa	ISO 37
300% strain	4.20	MPa	ISO 37
100% strain	2.90	MPa	ISO 37
Tensile strain
fracture	550	%	ISO 37
tear strength	45	kN/m	ISO 34-1
Compression deformation
70℃，22 hr	43	%	ASTM D395B

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	75		ISO 868

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	-60.0	℃	ASTM D746

FLAME CHARACTERISTICS	Nominal value	Test method
Flame retardant level		UL 94
1.00 mm	HB	UL 94
1.50 mm	HB	UL 94
3.00 mm	HB	UL 94

Process Conditions
injection	Nominal value	Unit	Test method
Extrusion	Nominal value	Unit	Test method
Drying temperature	80	°C
Drying time	3.0	hr
Barrel rear temperature	180	°C
Barrel middle temperature	185	°C
Barrel front temperature	185	°C
Nozzle temperature	190 to 220	°C
Processing (melt) temperature	190 to 230	°C
Mold temperature	10 to 50	°C
Back pressure	0.500 to 0.850	MPa
Screw speed	100 to 200	rpm
Clamping force	4.0 to 7.0	kN/cm²
Drying temperature	80	°C
Drying time	3.0	hr
Barrel 1 zone temperature	180	°C
Barrel 2 zone temperature	185	°C
Barrel 3 zone temperature	185	°C
Nozzle temperature	200	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.