Visico™ LE4421/LE4437

About
Visico LE4421/LE4437 is a scorch retardant, moisture-crosslinking polyethylene compound for low voltage insulation The combination of a VISICO base material, LE4421, and a tin catalyst masterbatch, LE4437, provides a highly scorch retardant compound with excellent thermal stability. LE4421/LE4437 contains a patented scorch retardant additive (SRA) that increases the processing window for a moisture crosslinking compound and minimizes the tendency for premature crosslinking in the extruder, head or die. LE4437 should be added to LE4421 directly in the extruder hopper by dry blending a ratio of 5 parts LE4437 to 95 parts LE4421. LE4437 also provides, in addition to catalyst, a stabilizaton package containing suitable antioxidants, a metal passivator and a metal deactivator and a 25% loading of fine particle size carbon black for UV weather resistance. Properly mixed, during the extrusion process, LE4421/LE4437 exhibits excellent thermal stability to oxidation. The final insulation or jacketing will also contain 2.5% of a suitable carbon black to ensure satisfactory UV weathering stability. LE4421/LE4437 is readily pigmented to a variety of colors using standard wire & cable concentrates designed for thermoplastic or crosslinked polyethylene. UV weather resistance is obtained by the addition of a suitable carbon black or UV additive. Using VISICO LE4432 in place of LE4437 combines a tin catalyst along with the proper carbon black to provide a black, UV resistant, moisture crosslinking cable insulation. APPLICATION: LE4421/LE4437 is recommended for use as insulation for low voltage conrol cables and power cables up to 6kv in rating. Specifications Visico LE4421/LE4437 in combination meets the applicable requirements as below when processed using sound extrusion and testing procedure: Underwriters Laboratories Standards 854 for types USE and USE-2 NF C33-210 HD 603 S1 ASTM D 2655 Canadian Standards Association C22.2 No. 1790-00-AirportSeries Lighting Cables and C22.2 No. 38 Cable Type RW-90 Outdoor EC 502 NBN C 33-321&&

Product Description
SupplierBorealis AG
GenericXLPE
Material StatusCommercial: Active
FeaturesWeather resistance is good,Crosslinked,Inoxidizability,Heat Stabilized
AvailabilitysAfrica & Middle East ,North America,Latin America,Asia Pacific,Europe
Process MethodsExtrusion

Technical Data
PHYSICALNominal valueUnitTest method
Density ASTM D792
0.923g/cm³ASTM D792
0.941g/cm³ASTM D792
Melt Flow Rate
190℃,2.16kg0.90g/10minASTM D1238

elastic bodyNominal valueUnitTest method
tensile strength
yield15.0MPaASTM D412
Tensile strain
fracture300%ASTM D412

THERMALNominal valueUnitTest method
High temperature creep ICEA T-28-562
Elongation under load: 150 ℃< 50%ICEA T-28-562
Permanent deformation: 150 ℃< 5.0%ICEA T-28-562

Aging performanceNominal valueUnitTest method
Retention rate of tensile performance
After Ageing 168 h,121℃> 90%ASTM D638

Electrical performanceNominal valueUnitTest method
Volume resistivity1.0E+16ohms·cmASTM D257
Dielectric strength> 22kV/mmASTM D149
Dielectric constant
23 ℃,60 Hz2.30 ASTM D150
Dissipation factor
23℃,60 Hz5.0E-4 ASTM D150

Process Conditions
ExtrusionNominal valueUnitTest method
Barrel 1 zone temperature146°C
Barrel 2 zone temperature155°C
Barrel 3 zone temperature163°C
Barrel 4 zone temperature171°C
Nozzle temperature177°C

Notes
1. Typical properties: these are not to be construed as specifications.
2. Base Resin
3. Masterbatch
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.