| About |
|---|
| VisiJet Hi-Cast Material provides extreme resolution performance for high-end lost-wax casting of fine-detail items such as jewelry and micro-medical and electrical devices. Used exclusively in the ProJet CPX 3500 3D printers, the Hi-Cast material sets the standard for feature definition, accuracy and precision.&& |
| Product Description | |
|---|---|
| Generic | 浇铸蜡 |
| Material Status | Commercial: Active |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.810 | g/cm³ | ASTM D4164 |
| Shrinkage rate | |||
| Linear | 0.75 | % | |
| Volumetric | 2.2 | % | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 70.0 | ℃ | |
| Softening temperature | 52 to 62 | ℃ |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Liquid @ 80 °C |
| 3. 40 °C to RT |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |