| About |
|---|
| VisiJet Techplast Plastic Material (gray color) provides an economical solution for general models. In addition, this material is commonly used for sacrificial patterns for numerous direct casting applications.&& |
| Product Description | |
|---|---|
| Generic | 3D打印材料 |
| Material Status | Commercial: Active |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.02 | g/cm³ | ASTM D4164 |
| Ash Content | 0.010 | % | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 866 | MPa | ASTM D638 |
| tensile strength | 22.1 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 6.1 | % | ASTM D638 |
| bending strength | 28.1 | MPa | ASTM D790 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 46.0 | ℃ | ASTM D648 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Liquid @ 80 °C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |