Vistek 1963 F - SOLIAO

About
Vistek 1963 F is a Thermoplastic material. It is available in North America. Primary attribute of Vistek 1963 F: Food Contact Acceptable. Typical application of Vistek 1963 F: Food Contact Applications&&

Product Description
Generic	热塑性聚酯
Material Status	Commercial: Negative
Features	Food contact compliance
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.02	g/cm³	ASTM D792
Melt Flow Rate
200℃，5.0kg	13	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	40.0	MPa	ASTM D638
Tensile strain
fracture	17	%	ASTM D638
Bending modulus	1970	MPa	ASTM D790
bending strength
yield	52.4	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
3.2mm	48	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	85.0	℃	ASTM D648

optical performance	Nominal value	Unit	Test method
Transmittance	90.0	%	ASTM D1003
Haze	2.9	%	ASTM D1003

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	71	°C
Drying time	2.0 to 4.0	hr
Barrel rear temperature	193 to 232	°C
Barrel middle temperature	193 to 232	°C
Barrel front temperature	193 to 232	°C
Mold temperature	27 to 54	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.