| About |
|---|
| Viton® GBL-600S is a next generation, easy processing, peroxide cured 68% fluorine fluoroelastomer based on new Advanced Polymer Architecture technology. Compared to the original Viton® GBL-900, Viton® GBL-600S exhibits processability coupled with similar or improved fluids resistance in aromatic hydrocarbons, alcohols, water, steam, and acids. Features Cures exceptionally fast to a high state of cure Exhibits improved mold release/mold fouling properties compared to Viton® GBL-900 and Viton® GBL-200 Exhibits improved mold flow, less shear sensitivity, and lower extruder die swell for a 65 Mooney FKM Exhibits excellent physical properties with high elongation, both original and aged Exhibits similar heat, fluids, and low temperature resistance compared to Viton® GBL-900 and Viton® GBL-200 Exhibits excellent compression set resistance with short (2 hr) or no postcure&& |
| Product Description | |
|---|---|
| Supplier | Chemours |
| Generic | 氟橡胶 |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good Dimensional Stability,Ethanol tolerance,Good liquidity,Antifreeze,Good stripping performance,Acidproof,Good Tensile Strength,Resistance to the steam,Hydrocarbons |
| Availabilitys | North America,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.84 | g/cm³ | ASTM D792 |
| Mooney viscosity | |||
| ML 1+10，121℃ | 65 | MU | ASTM D1646 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | ASTM D2240 | ||
| Shore A, 23 ℃ | 67 | ASTM D2240 | |
| Shore A, 23 ℃ | 73 | ASTM D2240 | |
| Shore A, 23 ℃ | 69 | ASTM D2240 | |
| Shore A, 23 ℃ | 71 | ASTM D2240 | |
| Shore A, 23 ℃ | 70 | ASTM D2240 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| 23℃ | 0.600 | MPa | ASTM D412 |
| 23℃ | 0.700 | MPa | ASTM D412 |
| 23℃ | 0.800 | MPa | ASTM D412 |
| 23℃ | 0.800 | MPa | ASTM D412 |
| 23℃ | 1.10 | MPa | ASTM D412 |
| tensile strength | ASTM D412 | ||
| 100% strain, 23 ℃ | 3.30 | MPa | ASTM D412 |
| 100% strain, 23 ℃ | 5.10 | MPa | ASTM D412 |
| 100% strain, 23 ℃ | 4.40 | MPa | ASTM D412 |
| 100% strain, 23 ℃ | 4.30 | MPa | ASTM D412 |
| 100% strain, 23 ℃ | 3.50 | MPa | ASTM D412 |
| tensile strength | ASTM D412 | ||
| 10% strain | ASTM D412 | ||
| Yield, 23 ℃ | 13.5 | MPa | ASTM D412 |
| Yield, 23 ℃ | 10.1 | MPa | ASTM D412 |
| Yield, 23 ℃ | 20.4 | MPa | ASTM D412 |
| Yield, 23 ℃ | 20.8 | MPa | ASTM D412 |
| Yield, 23 ℃ | 15.7 | MPa | ASTM D412 |
| Tensile strain | ASTM D412 | ||
| Fracture, 23 ℃ | 330 | % | ASTM D412 |
| Fracture, 23 ℃ | 160 | % | ASTM D412 |
| Fracture, 23 ℃ | 320 | % | ASTM D412 |
| Fracture, 23 ℃ | 310 | % | ASTM D412 |
| Fracture, 23 ℃ | 410 | % | ASTM D412 |
| tear strength | |||
| 150℃ | 10.4 | kN/m | ASTM D624 |
| Compression deformation | ASTM D395B | ||
| 200℃，22 hr | 17 | % | ASTM D395B |
| 200℃，22 hr | 14 | % | ASTM D395B |
| 200℃，336 hr | 53 | % | ASTM D395B |
| 200℃，336 hr | 56 | % | ASTM D395B |
| Aging performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume change | ASTM D471 | ||
| 23 ℃, 168 hr, C-grade standard fuel | 3.5 | % | ASTM D471 |
| 23 ℃, 168 hr, methanol | 55 | % | ASTM D471 |
| 100 ℃, 168 hr, in water | 4.3 | % | ASTM D471 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 508 mm/min, Aged 70 hr at 275°C |
| 3. 508 mm/min, Aged 168 hr at 150°C |
| 4. 508 mm/min, Aged 70 hr at 250°C |
| 5. 508 mm/min |
| 6. 508 mm/min, Aged 2 hr at 232°C |
| 7. 20 in/min |
| 8. 20 in/min, Aged for 168 hr at 302°F |
| 9. 20 in/min, Aged for 2 hr at 450°F |
| 10. 20 in/min, Aged for 70 hr at 482°F |
| 11. 20 in/min, Aged for 70 hr at 527°F |
| 12. Die B |
| 13. Nicked |
| 14. Postcured at 232°C |
| 15. Aged for 168 hr at 302°F |
| 16. Aged for 2 hr at 450°F |
| 17. Aged for 70 hr at 482°F |
| 18. Aged for 70 hr at 527°F |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |