| About |
|---|
| Product Description | |
|---|---|
| Generic | PA6 |
| Material Status | Commercial: Active |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.24 | g/cm³ | ISO 1183 |
| Water absorption rate | 2.3 | % | ISO 62 |
| Mold shrinkage rate | 0.3/0.8 | % | ISO 294-4 |
| ash content | 15 | % | ISO 3451-4 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 130 | MPa | ISO 527, 50 |
| Tensile strain | |||
| fracture | 3.5 | % | ISO 527, 50 |
| bending strength | 177 | MPa | ISO 178-2 |
| Bending modulus | 4739 | MPa | ISO 178, 2 |
| Rockwell hardness | 117 | R 级 | ISO 2039-2 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa | 195 | ℃ | ISO 75 |
| melting point | 220 | ℃ | ISO 3146C |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | 8.6 | kJ/m² | ISO 179-1eA |
| Charpy Unnotch Impact strength | 78 | kJ/m² | ISO 179/1eU |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | HB | mm/Class | UL 94 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | 1.0E+12 | ohms | IEC 60093 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |