Volgamid® PA66/6 G30HLS BK201

About

Product Description
Generic	PA66/6
Material Status	Commercial: Active

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Shrinkage rate	0.3-0.8	%	ISO 294-4
Density	1.36	g/cm³	ISO 1183
ash content	30-33	%	ISO3451-4

MECHANICAL	Nominal value	Unit	Test method
	119		ISO 2039/2
Bending modulus
2 mm/mim	9000	MPa	ISO 178
Tensile strain
Fracture, 50 mm/min	2	%	ISO527
bending strength
2 mm/min	260	MPa	ISO 178
tensile strength
50 mm/min	185	MPa	ISO527

IMPACT	Nominal value	Unit	Test method
Charpy Unnotch Impact strength	85	KJ/m²	ISO179/1eU
Charpy Notched Impact Strength	12	kJ/m²	ISO179/1eA

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa	235	℃	ISO 75

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
	HB	mm/Class	UL-94

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.