| About |
|---|
| Product Description | |
|---|---|
| Generic | PA66 |
| Material Status | Commercial: Active |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Water absorption rate | 1.1 | % | ISO 62 |
| Density | 1.09 | g/cm³ | ISO 1183 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Bending modulus | |||
| 2 mm/mim | 2190 | MPa | ISO 178 |
| bending strength | |||
| 2 mm/min | 81 | MPa | ISO 178 |
| tensile strength | |||
| 50 mm/min | 61 | MPa | ISO527 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 14 | kJ/m² | ISO180/1eA |
| Charpy Notched Impact Strength | 15 | kJ/m² | ISO179/1eA |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| 260 | ℃ | ISO3146C | |
| Hot deformation temperature | |||
| 1.8 MPa | 68 | ℃ | ISO 75 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| HB | mm/Class | UL-94 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | 1.0E+13 | ohms | IEC 60093 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |