| About |
|---|
| Features: Can be used for prototypes, functional models or lost models Fast delivery within a few working days Precise layering & high accuracy Components of high complexity Economical production in batch sizes of 1 as well as in series production Infiltration in any colour perfect for investment casting because of the base material PMMA&& |
| Product Description | |
|---|---|
| Generic | SMMA |
| Material Status | Commercial: Active |
| Features | Good surface appearance |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Ash Content | |||
| Residual after burnout | < 0.020 | % | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| — | 3.70 | MPa | |
| — | < 25.0 | MPa |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Softening temperature | 80 | ℃ |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| temperature | |||
| Burnout | 600 | ℃ | |
| Adhesive/color carrier | Polypor C |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. With epoxy finishing treatment |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |