| About |
|---|
| Vydyne 85XFS is a general-purpose PA66/6 copolymer resin. It is available in natural and is designed for extrusion-compounding applications. This copolymer PA66/6 resin provides a lower melting point and can be used for compounding thermally sensitive additives or fillers. This resin offers a well balanced combination of engineering properties characterized by high strength, rigidity, good toughness, high melt point, good surface lubricity and abrasion resistance. Vydyne 85XFS maintains the chemical resistance typical of PA66/6 to many chemicals, machine and motor oils, solvents and gasoline.&& |
| Product Description | |
|---|---|
| Supplier | Ascend |
| Generic | PA66/6 |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Good flexibility,Copolymer,Good wear resistance,Grease resistance,Solvent resistance,Gasoline resistance |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.14 | g/cm³ | ISO 1183 |
| Viscosity (H2SO4 (sulfuric acid)) | 135 to 146 | cm³/g | ISO 307 |
| bulk density | 674 | g/l | ASTM D1895 |
| water content | 0.50 | % | ASTM D6869 |
| Relative viscosity | 44.0 to 50.0 | ASTM D789 | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 245 | ℃ | ISO 11357-3 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Yellowness index | 4.0 | YI | ASTM D1925 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Formic acid |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |