| About |
|---|
| Vyncolit® X6952 is a glass fiber reinforced phenolic molding compound with superior mechanical properties : highest impact and excellent retention of mechanical properties at elevated temperatures.&& |
| Product Description | |
|---|---|
| Supplier | SBHPP |
| Generic | 酚醛树脂 |
| Material Status | Commercial: Active |
| Features | High impact resistance,V-1 |
| Availabilitys | Africa & Middle East ,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.70 | g/cm³ | ISO 1183 |
| Apparent density | 0.63 | g/cm³ | ISO 60 |
| Shrinkage rate | 0.14 | % | ISO 2577 |
| Water absorption rate | |||
| Equilibrium, 23 ℃, 50% RH | 0.060 | % | ISO 62 |
| Post contraction | 0.010 | % | ISO 2577 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 18000 | MPa | ISO 527-2 |
| tensile strength | 132 | MPa | ISO 527-2 |
| Tensile strain | |||
| fracture | 1.0 | % | ISO 527-2 |
| Bending modulus | 17000 | MPa | ISO 178 |
| bending strength | 255 | MPa | ISO 178 |
| compressive strength | 300 | MPa | ISO 604 |
| Fracture bending strain | 1.6 | % | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | 4.9 | kJ/m² | ISO 179 |
| Charpy Unnotch Impact strength | 21 | kJ/m² | ISO 179 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 224 | ℃ | ISO 75-2/Af |
| Linear coefficient of thermal expansion | TMA | ||
| MD | 1.0E-5 | 1/℃ | TMA |
| TD | 4.1E-5 | 1/℃ | TMA |
| Thermal conductivity coefficient | 0.37 | W/m/K | ASTM D1461 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | 1.9E+13 | ohms | IEC 60093 |
| Volume resistivity | 7.0E+14 | ohms·cm | IEC 60093 |
| Dielectric strength | 38 | kV/mm | IEC 60243-1 |
| Compared to the leakage tracing index | 175 | V | IEC 60112 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| 3.00 mm | V-1 | UL 94 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |